Oil-water separator assembly for Fleetguard model Part number FH2390000JX
- Transparent water cup is convenient to pay attention to filtered impurities and water at any time, and timely discharge
- Filter seal, the top of the aluminum seal, strengthen the hardness protection, special sealing rubber strip sealing protection.
- Material, the outer wall is made of seamless steel pipe (military technology), the thickened steel wall increases the durability of the product, and the central part is made of copper support shaft.
- Super quality, truly make a product accompany the car for life, and only need to replace the Parker filter in the middle.
Engine wiring harness for stacker crane, wiring harness model A42180.0100
1.The engine is the core component of a vehicle, and the wiring harness is an important device for accurately transmitting precise instructions of the vehicle. The engine harness is mainly used to transmit commands from the electronic control unit (ECU) to the power unit of the vehicle, and has functions such as short circuit prevention, weather resistance, temperature resistance, as well as the anti vibration performance of the cable harness.
2.The main components include: ECU, main wiring harness, power unit wiring harness, control motor and electrical system related wiring harness, forming a complete and reliable circuit network as a whole.
3.A cable component with elastic anti vibration connection that can alleviate the impact force acting on the wire harness and protect components from damage.
Spinner cylinder assembly for Konecranes SMV7/8ECB90,588 spreader model No. 52485294
1.The hydraulic cylinder is the core component of the rotating cylinder, and its structure and performance have an important influence on the working efficiency and life of the rotating cylinder. The hydraulic cylinder includes an inner cylinder, a piston, a piston rod, seals and accessories. The piston rod connects the rotating parts, and the inner barrel and piston are subjected to hydraulic pressure, converting hydraulic energy into mechanical kinetic energy
The fuel pump is used in Volvo penta TAD760VE engine model number 21620116
1.OE number: 21620116 21019945 20798525 20853715 22905123 04297075 0429-7075 04282358 04503576 021138
2.Material: Special high speed steel, copper, plastic, etc.
3.Quality: High quality, advanced
4.Car models: VOLVO, DEUTZ (VOLVO/DEUTZ)
The generator is used in Cummins QSM11 model number 5332604
Installation method: conventional
Applicable objects of accessories: starter, engine
Working voltage: 24V
Proportional solenoid valves for Dana 15.5TE27418-70,157LTE30510-4 model Part number 4216197
1.Proportional solenoid valve is a device that controls the opening of the valve by changing the input current of the electromagnet. It acts on the valve through the magnetic field of the electromagnet, so that the opening of the valve is proportional to the input current of the electromagnet.
2.The proportional solenoid valve acts on the valve through the magnetic field of the electromagnet, and changes the opening of the valve by adjusting the input current of the electromagnet through the control circuit, so as to achieve the accurate control of the flow of the convection body. Through the feedback sensor, the opening of the valve can be monitored and adjusted in real time to meet the needs of different working conditions.
The turbocharger is used in Volvo penta TAD1250VE model number 3802154
The working principle of the turbocharger mainly relies on the exhaust gas from the engine to drive one turbine, which in turn drives the other impeller on the coaxial compressed air. This process can be broken down into the following steps:
- Exhaust gas drive turbine: The high-temperature and high-pressure exhaust gas discharged by the engine enters the exhaust gas turbine through the exhaust pipe and drives the turbine impeller to rotate.
- Turbine drives compressor impeller: the rotation of the turbine impeller is transferred to the compressor impeller through the shaft, driving the compressor impeller to rotate.
- Air compression: The rotation of the compressor impeller inhales and compresses the air to form a high-pressure gas.
- Intake pressurization: the compressed high-pressure air is sent into the engine combustion chamber and mixed with fuel to burn and increase the engine output power.
Repair kit for lifting oil cylinder of stacker crane, model 924015.0099
1.Usually composed of inner ring, outer ring, sealing ring, O-ring, and other parts.
2.By using oil seals at the interfaces of mechanical equipment, the leakage of lubricating oil or liquid media and the entry of external dust and pollutants are prevented to ensure the normal operation of the equipment.
3.By using flexible materials to separate the friction surface, it prevents oil leakage from the inside of the machine to the outside, thereby preventing problems such as insufficient lubrication and damage to parts. In addition, it can also prevent the entry of impurities inside the machine, avoid damage to machine parts, and reduce the frequency of machine maintenance.
Cable tow chain for Kalmar model part number 923941.0104
The reason why the steel tow chain can protect the cable is that its main body is composed of the chain wrench support and the spool pin, so that there is no relative movement between the cable or rubber tube and the tow chain, and no distortion. General steel tow chain materials are mainly aluminum alloy, carbon steel and stainless steel. Different from plastic tow chain, steel tow chain is more suitable for harsh working environment scenes, steel tow chain is better than plastic tow chain in terms of carrying cables, tubing, etc., wear resistance, metal tow chain is also relatively good plastic tow chain. The plastic drag chain has the advantages of simple structure, convenient installation and disassembly.
The fan is used for Kalmar DRF450 model part number 923855.1558
Fan is a common mechanical equipment, mainly used to produce air flow or increase the flow speed of air flow. By rotating the blade or impeller, it uses the kinetic energy conversion principle to convert mechanical energy into air flow energy, so as to realize the movement and transportation of air flow. Fan is widely used in industry, construction, agriculture, and other fields, has an important role.
Radiator for Kalmar model part number 923829.0633
The main principle of the heat sink is to effectively cool the hardware by transferring thermal energy from the hardware components that generate heat to the heat sink, which is then dissipated through the surface of the heat sink into the surrounding air.
The key part of the turbocharger is the bearing. This work light is used for Kalmar DCU80 series model number 921733.0026
1. Use warm and soft yellow lighting to create a comfortable reading or working atmosphere.
2. The design of this lamp is unique, the light body line is smooth, equipped with environmentally friendly and energy-saving LED bulbs. The translucent lampshade makes the light gentle and provides plenty of comfort for working and reading.


Phone
Send Email
whatsapp

